Displaying An Active Settable Work Offset - Siemens SINUMERIK 840Di sl Operating Manual

5
01/2008

5.6.4 Displaying an active settable work offset

Work
Go to...
offset
Active
settable WO
References
Overview
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Function
The active settable work offsets (selected from part program or MDA)
can be displayed.
Sequence of operations
Press the "Work offset" and "Go to ..." softkeys.
The vertical softkey bar changes.
The "Active settable WO" window opens.
You can edit these values if necessary.
/PGA/, Programming Guide Advanced
An overview shows all values of the active work offset and offsets (no
changes possible) including a selection of tool data (T number, D
number, etc.). The basic work offset and the settable work offset are
displayed as the sum.
Parameters operating area
5.6 Zero/work offset
5
5-235