Si (Safety Integrated): User Agreement - Siemens SINUMERIK 840Di sl Operating Manual

4
Machine operating area
4.4 JOG mode

4.4.5 SI (Safety Integrated): User agreement

User
agreement
4-120
Function
If the option "user agreement" is installed on the NC, you must enable
or disable the function depending on the keylock switch position in
"Approach reference point" mode.
User agreement can only be granted if keylock switch position 3 or
higher applies in respect of the access level.
The displayed values always refer to the machine (MCS).
Sequence of operations
"JOG Ref" mode is selected in the "Machine" operating area.
The channel to be referenced is already selected.
Press the "User agreement" softkey.
The "Confirm Machine Positions" window is opened.
The machine axes in the MCS are displayed, together with the current
position and a checkbox for activating/deactivating user agreement.
Machine axes that do not have to be referenced are shown inverted:
With their current position, but without check box.
Position the cursor on the desired machine axis.
Activate or deactivate user agreement for the selected machine axis
via the "Toggle" key.
Check whether the axis is referenced. If not, error message "Please
reference axis first" is output. User agreement cannot be activated for
the axis until it has been referenced.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
4
01/2008
© Siemens AG 2008 All rights reserved.