Switching On/Switching Off The Control - Siemens SINUMERIK 840Di sl Operating Manual

1
Introduction
1.3

Switching on/switching off the control

1.3 Switching on/switching off the control
Switching on
Switching off
1-20
Function
A variety of methods can be employed to switch on the power supply
to the control system or to the whole plant.
Machine manufacturer
Please follow the machine manufacturer's instructions!
After the control has been switched on, the "Reference point
approach" display or another main screen programmed by the
machine manufacturer will appear.
Machine
Channel Reset
Program aborted
MKS Position.Repos-Versch.
MCS Position
-X 0.000 mm
+X900.000mm0.000 + X 900.000 mm 0.000
+Y 0.000 mm
- Y -156.000 mm 0.000
-Y-156.000mm0.000
+ Z 230.000 mm 0.000
+Z230.000mm0.000 +Z 0.000 mm
+ 0.000 mm
Please follow the instructions below for switching off the control or the
entire system!
Machine manufacturer
Please follow the machine manufacturer's instructions!
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Jog
Master spindle
Act. +
Set
Pos.
Power [%\
Feedrate mm/min
Act. 0.000 0.000 %
Set 0.000
Tool
preselected tool :
G0 G91
© Siemens AG 2008 All rights reserved.
1
01/2008
S1
0.000 rev./min
0.000 rev./min
0.000 deg.
0.000 %
REF