Example Of A Job List With Two-Channel 1:1 Links - Siemens SINUMERIK 840Di sl Operating Manual

2
01/2008

2.7.2 Example of a job list with two-channel 1:1 links

© S iemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Examples:
COPY * *
(Copies all files from the workpiece of the job list to all NCs
that are configured in NETNAMES.INI)
COPY PART12.MPF NC=NCU_2
(Copies one file from the workpiece of the job list to the NC
"NCU_2")
COPY /SPF.DIR/PART1.* CG=MILL2
(Copies all files with one name from one directory, e.g.,
PART1.* from subprograms (SPF.DIR) to a channel group,
i.e., to all NCs that have channels from this group assigned to them)
COPY /MPF.DIR/* CH=CHANNEL22
(Copies all files from one directory, e.g., all files from
programs (MPF.DIR) to the NC which has this channel assigned to
it.)
Example
If only channel1 and channel2 on NCU1 (1:1 link) were involved in
machining of the workpiece, then the job list structure would be as
follows:
LOAD /MPF.DIR/Gen.MPF
LOAD /Work.DIR/Part1.WPD/WpdGen.MPF
LOAD /Work.DIR/Part1.WPD/ Channel1.MPF
LOAD /Work.DIR/Part1.WPD/ Channel1.INI
LOAD /Work.DIR/Part1.WPD/ K12.MPF
LOAD /Work.DIR/Part1.WPD/ Channel2.MPF
LOAD /Work.DIR/Part1.WPD/ Channel2.INI
LOAD /Work.DIR/Part1.WPD/ K22.MPF
SELECT /Work.DIR/Part1.WPD/Channel1.MPF CH=1
SELECT /Work.DIR/Part1.WPD/Channel2.MPF CH=2
The destination is not specified for loading in a 1:1 link, the current NC
is the default.
Operator Components/Operating Sequences
2.7
2
Job list
part
2-75