Overstore - Siemens SINUMERIK 840Di sl Operating Manual

4
Machine operating area
4.6 Automatic mode

4.6.11 Overstore

Single Block

Overstore

Cycle Start
4-150
A dialog message appears as soon as all the channels involved in the
current search have exited Program test mode, see "Search target in
program editor mode" above.
Any repositioning offsets (in the individual channels) can be retracted
in sequence via manually controlled traversing movements in JOG
mode, before program processing is continued via NC Start at the
point in the program reached by the block search.
Function
In "AUTO" mode, you can overstore technological parameters
(auxiliary functions, all programmable instructions ...) in the working
memory of the NC. You can also enter and execute any NC block.
Sequence of operations
"AUTO" mode is selected in the "Machine" operating area.
Overstore with single block:
The program automatically stops at the next block boundary.
The "Overstore" window is opened.
In this window, you can now enter the NC blocks that are to be
executed.
The blocks you have entered are executed and displayed in the
"Current block" window.
The "Overstore" window and associated softkeys are not displayed
again until the control switches to the "Channel interrupted", "NC
Stop" or "NC Reset" state.
More blocks can be added to the overstore buffer when these blocks
have been executed.
Note:
After "Overstore", a subprogram with the content REPOSA is
executed. The program is displayed for the user.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
4
01/2008
© Siemens AG 2008 All rights reserved.