Skip levels, activate
Select the corresponding checkbox to activate the desired skip level.
Note
The "Program Control - Skip Blocks" window is only available when more than one skip level
is set up.
6.9
Overstore
With overstore, you have the option of executing technological parameters (for example,
auxiliary functions, axis feed, spindle speed, programmable instructions, etc.) before the
program is actually started. The program instructions act as if they are located in a normal part
program. These program instructions are, however, only valid for one program run. The part
program is not permanently changed. When next started, the program will be executed as
originally programmed.
After a block search, the machine can be brought into another state with overstore (e.g. M
function, tool, feed, speed, axis positions etc.), in which the normal part program can be
successfully continued.
Precondition
The program to be corrected is in the Stop or Reset mode.
Procedure
Universal
Operating Manual, 05/2017, A5E40868517
Software option
You require the "Extended operator functions" option for the overstore function
(for 828D).
1.
Open the program in the "AUTO" mode.
2.
Press the "Overstore" softkey.
The "Overstore" window opens.
3.
Enter the required data and NC block.
Machining the workpiece
6.9 Overstore
117