Relocating A Multitool - Siemens SINUMERIK 840D sl Operating Manual

Tool management
11.14 Working with multitool
11.14.8

Relocating a multitool

Multitools can be directly relocated within magazines to another magazine location, which
means that you do not have to unload multitools with the associated tools from the magazine
in order to relocate them to a different location.
When you are relocating a multitool, the system automatically recommends an empty location.
You may also directly specify an empty magazine location.
Procedure
11.14.9 Positioning a multitool
You can position a magazine. In this case, a magazine location is positioned to the loading
point.
Multitools that are located in a spindle can also be positioned. The multitool is rotated and
therefore the multitool location involved is brought into the machining position.
258
1. Select the "Parameter" operating area.
2. Press the "Magazine" softkey.
3. Position the cursor at the multitool that you wish to relocate to a
different magazine location.
4. Press the "Relocate" softkey.
The "... relocate from location ... to location ..." window is displayed.
The "Location" field is pre-assigned with the number of the first
empty magazine location.
5. Press the "OK" softkey to locate the multitool at the recommended
magazine location.
- OR -
Enter the required magazine number in the "...magazine" field and
the required magazine location number in "Location" field.
Note:
Please refer to the machine manufacturer's specifications.
Press the "OK" softkey.
The multitool with the tools is relocated to the specified magazine
location.
Operating Manual, 05/2017, A5E40868517
Universal