Enlarging Or Reducing The Cad Drawing - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Machining the workpiece
6.17 Working with DXF files
6.17.2.3
Enlarging or reducing the CAD drawing
Requirement
The DXF file is opened in the Program Manager.
Procedure
6.17.2.4
Changing the section
If you want to move or change the size of a section of the drawing, for example, to view details
or redisplay the complete drawing later, use the magnifying glass.
You can use the magnifying glass to determine the section and then change its size.
Requirement
The DXF file is opened in the Program Manager or in the editor.
152
Press the "Clean automat." softkey to hide all non-relevant layers.
3.
Press the "Clean automat." softkey to redisplay the layers.
1.
Press the "Details" and "Zoom +" softkeys if you wish to enlarge the size
of the segment.
- OR -
2.
Press the "Details" and "Zoom -" softkeys if you wish to reduce the size of
the segment.
- OR -
3.
Press the "Details" and "Auto zoom" softkeys if you wish to automatically
adapt the segment to the size of the window.
- OR -
4.
Press the "Details" and "Zoom elem. selection" softkeys if you want to
automatically zoom elements that are in a selection set.
Operating Manual, 05/2017, A5E40868517
Universal
Advertisement
Table of Contents
