Universal
Operating Manual, 05/2017, A5E40868517
Spread
● Zoom-out graphic contents (e.g. simulation, mold making
view)
Pinch
● Zoom-in graphic contents (e.g. simulation, mold making
view)
Pan with one finger
● Move graphic contents (e.g. simulation, mold making view)
● Move list contents
Pan with two fingers
● Turn graphic contents (e.g. simulation, mold making view)
Tapping and holding
● Open object for changing (e.g. NC block)
Tapping with 2 index fingers - only with the 840D sl
● Tap with two fingers simultaneously in the lower right and
left-hand corners to open the TCU menu.
The menu has to be opened for service purposes.
Operating with gestures
3.2 Finger gestures
61