Display And Edit User Variables - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece

6.11 Display and edit user variables

See also
Replacing program text (Page 121)
6.11 Display and edit user variables
6.11.1 Overview
The defined user data may be displayed in lists.
User variables
The following variables can be defined:
● Global arithmetic parameters (RG)
● Arithmetic parameters (R parameters)
● Global user data (GUD) is valid in all programs
● Local user variables (LUD) are valid in the program where they have been defined.
● Program-global user variables (PUD) are valid in the program in which they have been
defined, as well as in all of the subprograms called by this program
Channel-specific user data can be defined with a different value for each channel.
Entering and displaying parameter values
Up to 15 positions (including decimal places) are evaluated. If you enter a number with more
than 15 places, it will be written in exponential notation (15 places + EXXX).
LUD or PUD
Only local or program-global user data can be displayed at one time.
Whether the user data are available as LUD or PUD depends on the current control
configuration.
130
5. Press the "Delete mach. times" softkey if you wish to delete the machining
times.
The machining times that have been determined are deleted from the
editor as well as from the actual block display. If the machining times are
saved to an ini file, then this file is also deleted.
6. Press the "OK" softkey to confirm the settings.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Operating Manual, 05/2017, A5E40868517
Universal