Creating A Job List - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Procedure
12.4.5
Creating a job list
For every workpiece, you can create a job list for extended workpiece selection.
In the job list, you specify instructions for program selection in different channels.
Syntax
The job list contains the SELECT instructions.
SELECT <program> CH=<channel number> [DISK]
Universal
Operating Manual, 05/2017, A5E40868517
1.
Select the "Program manager" operating area.
2.
Select the desired storage location and position the cursor on the folder
in which you would like to create the file.
3.
Press the "New" and "Any" softkeys.
The "Any New Program" window appears
4.
Select a file type from the "Type" selection field (for example, "Definitions
GUD") and enter the name of the file to be created when you have se‐
lected a workpiece directory in the NC memory.
The file automatically has the selected file format.
- OR -
Enter a name and file format for the file to be created (e.g. My_Text.txt).
The name can be a maximum of 24 characters long.
You can use any letters (except accented), digits or the underscore sym‐
bol (_).
5.
Press the "OK" softkey.
12.4 Creating a directory/program/job list/program list
Managing programs
273
Advertisement
Table of Contents
