5
Parameters operating area
5.5
Setting data
5.5.5 Starting angle for thread cutting
Setting
data
Starting
angle
5-226
Function
For thread cutting, a starting position for the master spindle is
displayed as the starting angle. A multiple thread can be cut by
changing the angle when the thread cutting operation is repeated.
Sequence of operations
Press the "Setting data" softkey.
The vertical softkey bar changes.
Edit starting angle:
Press the "Starting angle" softkey.
The "Starting angle for thread" window opens.
Enter a new value.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
5
01/2008
© Siemens AG 2008 All rights reserved.