Jog Mode; Function And Main Screen - Siemens SINUMERIK 840Di sl Operating Manual

4
Machine operating area
4.4

JOG mode

4.4

JOG mode

4.4.1 Function and main screen

Jog
4-114
Function
In manual mode you can:
1. Synchronize the control measuring system with the machine
(reference point approach),
2. Set up the machine, i.e., activate manually-controlled motions on
the machine using the keys and handwheels provided on the
machine control panel.
3. Activate manually-controlled motions on the machine using the
keys and handwheels provided on the machine control panel while
a part program is being interrupted.
The following "JOG" main screen is displayed when you press the
"Menu Select" key
followed by the "JOG" key.
The "JOG" main screen contains values relating to position, feedrate,
spindle and tool.
Machine
Channel reset
MCS Position Repos offset
-X 90.646 mm
+X900.000mm0.000
+Y 113.385 mm
-Y-156.000mm0.000
+Z230.000mm0.000 +Z 109.131 mm
+V 0.000 mm
Scratch
Preset
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Jog
Program aborted
Master spindle
0.000 Act. +
0.000 Set
0.000 Pos
0.000
Power [%]
Feedrate
Act. 7000.000
Set 7000.000
Tool
Preselected tool:
G0 G91
Handwheel
© Siemens AG 2008 All rights reserved.
4
01/2008
G. fct. +
transf.
Display
aux. funct.
S1
0.000 rpm
Spindles
0.000 rpm
0.000 deg.
Axis
0.000 %
feedrate
mm/min
0.000%
Zoom
Act. val.
Act. val.
WCS
INC