Siemens SINUMERIK 840Di sl Operating Manual page 326
Hide thumbs
Also See for SINUMERIK 840Di sl:
- Commissioning manual (632 pages) ,
- Programming manual (560 pages) ,
- Function manual (274 pages)
Table of Contents
Advertisement
6
"Program" operating area
6.8
Program simulation
6-326
If the machine data 10190 ($MN_TOOL_CHANGE_TIME) is set and
greater than 0, the "Downtime setting" offers a range of options via
additional buttons:
The user can either enter an individual time for the tool change or
select the displayed value for the machine data.
The default is the value entered by the user. This can be preset via
the entry in the file SIMINI_T.COM (for turning) or SIMINI_M.COM (for
milling) in the \DP.DIR\SIM.DIR data manager.
[Sim]
DP_SIMNCK_MD10190=0
;Default: value 0 = tool change time is set by user
;
($MN_TOOL_CHANGE_TIME)
If MD10190 is not set or the value is equal to 0, the formula remains
as it was previously.
The specified display and color properties for the simulation can be
Display and
modified according to the manufacturer's requirements if a valid
colors...
password is entered.
Settable parameters: See Chapter "Display and colors"
(see DP_SIMNCK_TOOLCHANGETIME)
1 = tool change time from MD10190
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
6
01/2008
© Siemens AG 2008 All rights reserved.
Advertisement
Table of Contents
