Cancel Dial Out; In Conference Dtmf Controls - NEC Univerge SV8100 User Manual

Revision 1.0
___________________________________________________________________________________
2.24
2.25
___________________________________________________________________________________
1 - 28
4. Using your phone pad, dial 33#. This will drop the new user and return
you to the original conference call.

Cancel Dial Out

To cancel a dial out operation, press **#. You will either be returned to dial
tone to begin a new dial out or return to the conference.
Press **# a second time to return the conference.

In Conference DTMF Controls

This section describes some of the options available to control access, and
record a conference call.
Mute and Unmute
There are two forms of muting available. The first is Self Muted, which can be
activated by the participant or moderator, but can only be deactivated by the
participant with 22#. This gives individual participants the ability to mute
themselves or the moderator to mute participants in such a way the
participants can deactivate the mute at will. This is useful if the moderator
does not have access to RealView to see which line is the source of noise and
mute it individually. As participants remove the mute, the offending line will be
easily identified.
1. Press 11# on the phone keypad to mute yourself.
2. Press 22# on the phone keypad to unmute yourself.
A moderator can press 16# on the phone keypad to self mute all users. Using
this option, the participants can use #22 to unmute themselves to ask a
question or to make a comment.
The second form of muting is Moderator Muted. It can only be activated or
deactivated by the moderator. This is used for presentations and other
conferences that are a presentation, lecture, training, etc. At the appropriate
time(s) the moderator can remove the muting and open the floor to questions.
A more refined version of this is to instruct participants on the use of hand
raising, then the moderator can unmute only those that have raised their hand.
1. Press 43# on the phone keypad to moderator-mute all participants.
2. Press 44# on the phone keypad to moderator-unmute all participants.
To mute a particular participant, the moderator should use the RealView page.
RGA Application Gateway Conference User Guide
SV8100