Program 20 : System Option Setup; System Options For Multiline Telephones - NEC SL2100 Installation Manual

ISSUE 1.0

20-02 : System Options for Multiline Telephones

Level:
IN
Description
Use Program 20-02 : System Options for Multiline Telephones to set various system options for
multiline telephones.
Input Data
Item Item
No.
01 Trunk Loop Key
Operation Mode
04 Retrieve the Line
After Transfer
05 Headset Busy
Mode
06 Pre-selection Time
07 Display mode of
Date and Time
08 LCD Display Hold-
ing Time
09 Disconnect Super-
vision
ACD Installation Manual

Program 20 : System Option Setup

Input Data
0 = Keep Lamp
1 = Extinction
Mode 0 = Keep Lamp
Incoming : 300 IPM Red blink
Talking : Green Lighting
(on Talking TEL)
Holding : 60 IPM Green
blink (on holding
TEL)
0 = Extinction
1 = Keep Lamp
0 = No (Disable)
1 = Yes (Enable)
0 ~ 64800 seconds
1 ~ 10
0 ~ 64800 seconds
0 = Disable (Off)
1 = Enable (On)
Description
1 = LED Off
LED Off
LED Off
Enable (1) or dis-
able (0) an exten-
sion ability to an-
swer a call after it
has been trans-
ferred, but before
it is answered.
Set the condi-
tions under which
a headset exten-
sion is busy to in-
coming callers.
When a multiline
terminal user pre-
selects a line key,
the system re-
members the pre-
selection for this
time.
Set how the Time
and Date appear
on display tele-
phones. There
are eight display
modes.
Use this option to
enable or disable
disconnect super-
vision for the sys-
tem trunks.
SL2100
Program
20
Default Related
Program
1
1
0 20-09-07
5
3
5
1
4-31