Resident System Program
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
When power is supplied to the system, the hardware configuration is
scanned and Resident System Program default values are assigned. This
enables immediate operation, even before the system is programmed to
accommodate the individual site requirements.
Terminal Type
Not applicable.
Required Components
None.
Not applicable.
General
Default assignments for Multiline Terminals are as follows:
LK 01~ LK 08 corresponds to CO 01~ CO 08.
Default assignments for Attendant Add-On Consoles are as follows:
DSS1 Port 1
DSS 2 Port 2
DSS 3 Port 1
DSS 4 Port 2
R-5
R5 – 489