Internal Voice/Tone Signalling - NEC Xen IPK Features & Specifications Manual

Internal Voice/Tone
Signalling
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
The Internal Voice/Tone Signalling feature allows Multiline Terminal users to
be signalled on incoming internal calls by voice announcement or by
ringing, depending on System Programming. The caller can dial an
additional digit to switch a voice announcement call to a ringing call, or
switch a ringing call to voice announcement. This feature allows Voice/Tone
switching from the calling side.
Terminal Type
All Multiline Terminals.
Required Components
None.
When programmed for Voice/Tone:
1. Lift the handset, and receive internal dial tone.
2. Dial the station number.
3. Receive voice page alert tone.
4. Voice announce the call.
5. Called party can reply handsfree.
- OR -
Dial (set as default). (Called party lifts the handset to respond to
A
ringing.)
When programmed for Tone/Voice:
1. Lift the handset, and receive internal dial tone.
2. Dial the station number. (Called party station rings.)
3. Talk with party after the call is answered.
- OR -
Dial (set as default).
A
4. Voice announce the call.
5. Called party can reply handsfree.
I-4
I4 – 361