Delayed Ringing - NEC Xen IPK Features & Specifications Manual

Delayed Ringing

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The Delayed Ringing feature allows a secondary answering positions to
ring on incoming calls after a programmed time interval. This feature applies
to CO/PBX lines, Secondary Incoming Extensions, and Call Arrival Keys.
Terminal Type
All terminals.
Required Components
None.
To process an incoming call:
1. Receive delayed incoming ring.
2. Answer the call in the standard manner.
Data Assignment
The time interval between the detection of an incoming call and the
start of Delayed Ringing is programmable in system data in
increments of one second. Default values are:
Outside call = 15 seconds
Internal call = 10 seconds
Tenant Ringing conflicts are resolved by programming Trunk-to-
Tenant Assignment. The lower numbered tenant that is assigned is
used as the ringing control.
General
The following incoming calls support Delayed Ringing:
Normal incoming CO/PBX ringing.
DIT/ANA, internal calls to Secondary Incoming Extension, and Call
Arrival Keys.
Incoming DID/Tie line calls.
DID/Tie line/Automated Attendant calls that convert to normal CO
ringing calls.
Incoming outside lines that appear at the Attendant Add-
On Console.
D-3
D3 – 237