Seized Trunk Name/Number Display - NEC Xen IPK Features & Specifications Manual

Seized Trunk Name/
Number Display
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The Seized Trunk Name/Number Display feature displays the telephone
name or number (assigned in System Programming) of each trunk in the
system. These names or numbers appear on the Multiline Terminal LCD
when a trunk is seized.
Terminal Type
All Multiline Terminals with an LCD.
Required Components
None.
For an outside call in progress (after Elapsed Call Timer starts):
T
1. Press .
2. Dial .
C
3. The trunk number and assigned name or number are briefly
displayed.
Data Assignment
Each of the 64 available trunks for Xen IPK Expanded or the 16
available trunks for the Xen IPK Basic can be assigned a name or
telephone number. The assigned name/number cannot be more than
13 character digits (including spaces and dashes).
Restrictions
During a conference call, the seized trunk Name/Number is not
displayed.
General
For outgoing calls, the Name/Number assigned is displayed when an
outside line is seized until a digit is dialled or the line is dropped.
For incoming or transferred calls, and calls removed from hold, the
Name/Number is displayed briefly (five seconds) after the line is
accessed. The Elapsed Call Timer begins immediately after the trunk
Name/Number is displayed.
S-4
S4 – 507