Hot Line - NEC Xen IPK Features & Specifications Manual

Hot Line

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
RELATED
FEATURES LIST
Features and Specifications Manual
The Hot Line feature enables a station user to automatically dial an outside
number or another station when the station goes off-hook. This feature is
provided for Multiline Terminals and Single Line Telephones.
Terminal Type
All terminals.
Required Components
None.
To execute from any station programmed for Hot Line:
1. Go off-hook by lifting the handset or pressing
2. The station or outside number is called.
Data Assignment
The Hot Line feature must be programmed in System Programming.
General
There is no limit, other than hardware abilities, to the number of Hot
Lines that can be supported in the system.
Up to 10 digits can be stored for dialling, including Trunk Access
Codes.
Multiline Terminal users assigned Hot Line can press the Feature key
and Access Code 6
dial tone.
With Hot Line assigned, internal dial tone can be received by pressing
the Hold, Conference, or Transfer key.
Feature
Number
F-1 Feature Access – User Programmable
P
or press Feature + Speaker to receive internal
Feature Name
H-6
.
H6 – 351