Prime Line/Hot Line Assignment - NEC Xen IPK Programming Manual

December 2004
Prime Line/Hot Line
Assignment
General Description
Use this memory block to enable user to access various features when going off-hook.
Display
Tel Port
No.
Data
(01~99)
No.
A0~C0
0 1 / 2 3 :
T I M E
Programming Procedures
Go off-line.
1
2 Press LK4 + BC
3 Use dial pad to enter telephone number (10 Digits max.).
Note: Use the following to enter data:
J
to move the cursor left
L to move the cursor right
K ~ I to enter numeric data
Q
J
+ to input *
Q
+ J to input #
N
Press to write the data.
4
P
Press to go back on-line.
5
Related Programming
No related programming is necessary for this Memory Block.
N
1. Prime Line function enables a user to seize a specified trunk when the Multiline Terminal goes off-hook. Refer to
function codes 063 and 064 for Memory Blocks , 1-1-46 , Access Code (1-Digit) Assignment and , 1-1-47 , Access
Code (2-Digit) Assignment.
2. To call the specified station number or CO line on Hot Line, go off-hook.
3. When using Prime Line an access code (
call processing.
4. To use Hot Line Assignment, one of the following must be entered:
•
Station Number
•
Access Code + Dial Number
•
Speed Dial Access Code + Speed Dial Buffer Number.
5. Only 10 digits can be assigned.
6. Telephone ports A0~C0 are ports 100~120.
DRAFT 3
428 – Chapter 1
Setting Data
D I S P L A Y
to access the Memory Block.
T P
+ ) must be entered to seize the intercom (ICM) for internal
NEC Business Solutions Ltd
4-23
System Mode
Submode
Data No.
PC Programming
Default Values
Not Specified

Prime Line/Hot Line Assignment, 4-23

4
—
23
+ BTT