NEC Xen IPK Programming Manual page 40

December 2004
LK 1 System Mode
LK 12 ACD/UCD
Data
Memory Block Name
No.
00 ACD/UCD Group Pilot Number
Assignment
01 ACD/UCD Group Overflow Destination
Assignment
02 ACD/UCD Overflow Timer Selection
LK 1 System Mode
LK 13 PRI/ISDN
Data
Memory Block Name
No.
00 PRI Channel Assignment
04 PRT B Channel Outgoing Priority
Selection
05 PRT B Channel-to-Trunk Group
Assignment
LK 1 System Mode
LK 14 Automatic Route Selection
Data
Memory Block Name
No.
00 ACR Feature Allow/Deny Selection
01 ACR Dialling Assignment
02 ACR Dialled Number Dial Allow/Deny
Selection
03 ACR Route Table Number Assignment
04 ACR Trunk Group to Route Number
Assignment
20 – Chapter 1
Default Value
Not Specified
Not Specified
60 sec.
Default Value
Refer to PRI Channel
Assignment on page 1-275.
Default Value
No
None
Yes
00
Normal
DRAFT 3
NEC Business Solutions Ltd
Programming Values
Tel No. (Up to 4 digits)
(for each ACD/UCD Group No. 1~4)
Tel No. (Up to 4 digits)
(for each ACD/UCD Group No. 1~4)
∞, 10 sec., 20 sec., 30 sec., 60 sec.,
120 sec., 180 sec., 240 sec.
(for each ACD/UCD Group No. 1~4)
Programming Values
0, 4, 8, 12, 16, 20, 24, 28, 32
Programming Values
Yes (Allow), No (Deny)
Table No. 1~4
Dial No. 01~C8
Setting Data (8 digit Max) including 0~9), *, #,
X (0~9), *, #), P (0 or 1), or N (2~9)
Yes (Allow), No (Deny)
Table No. 1~4
Dial No. 01~C8
Routes 01~32
Normal, TKGP 01~32, ICM
Multiline Terminal Programming