Programming Modes - NEC Xen IPK Programming Manual

Xen IPK
Programming Manual
2.2 System Programming Modes
System programming has eight modes and some modes have
submodes. The modes and submodes are listed in Table 1-1:

Programming Modes.

Line
Mode Name
Key
LK 1 System Mode
LK 2 Tenant Mode
LK 3 CO/PBX Line Mode
LK 4 Telephone Mode
LK 5 Trunk Group Mode
LK 6 Copy Mode
LK 7 ETU Mode
LK 8 Special Mode
DRAFT 3
Table 1-1: Programming Modes
Line
Key
LK 1 CO LIne
LK 2 ICM
LK 3 SLT
LK 4 Transfer/Automated Attendant
LK 5 SMDR/LCR
LK 6 DSS
LK 7 ESP
LK 8 PBR/Miscellaneous
LK 9 DISA
LK 10 CAR
LK 11 DTI
LK 12 ACD/UCD
LK 13 PRI ISDN
LK 14 ACR
LK 15 K-CCIS
N/A N/A
N/A N/A
N/A N/A
N/A N/A
LK 2 Tenant Mode Copy Assignment
LK 3 CO Line Mode Copy Assignment
LK 4 Telephone Mode Copy Assignment
LK 5 Trunk Group Mode Copy Assignment
LK 1 Card Interface Slot Assignment
LK 2 Telephone Type Assignment
LK 3 MIF Assignment
LK 1 ROM Version Confirmation
LK 2 System Speed Dial Memory Clear
LK 3 Station Speed Dial Memory Clear
LK 8 Second Initialisation
Programming Manual
Submode Name
Chapter 1 – 3