NEC Xen IPK Programming Manual page 34

December 2004
LK 1 System Mode
LK 2 ICM (Continued)
Data
Memory Block Name
No.
31 Call Pickup Group - Direct
LK 1 System Mode
LK 3 SLT
Data
Memory Block Name
No.
01 Bounce Protect Time Selection
02 SLT Hookflash Signal Selection
03 First Digit PBR Release Timer Selection
04 Dial 1 (DP) Hookflash Selection
05 Hookflash Start Time Selection
06 Hookflash End Time Selection
07 Voice Mail Digit Add Assignment
08 Voice Mail DTMF Delay Timer Selection
09 Voice Mail Disconnect Time Selection
10 Voice Mail DTMF Duration/Interdigit Time
Selection
11 SLT/PHS Talk Start Timer
14 – Chapter 1
Default Value
All Blank
Default Value
300 ms.
Hold
10 sec.
Yes
40 ms.
HST + 100 ms.
All Blank
1 sec.
1.5 sec.
110/80 ms.
DRAFT 3
NEC Business Solutions Ltd
Programming Values
0~9 groups. 30 Tel per group max.
Programming Values
Page 1:0 ms., 100 ms., 200 ms.,
300 ms., 400 ms., 500 ms.,
600 ms., 700 ms.
Page 2:800 ms. 900 ms., 1000 ms.,
1100 ms., 1200 ms., 1300 ms.,
1400 ms., 1500 ms.
Hold
Flash
10 sec., 20 sec., 30 sec., 40 sec., 50 sec., 60
sec.
Yes, No
40 ms., 90 ms., 140 ms., 190 ms
240 ms., 290 ms., 340 ms.,
390 ms., 440 ms., 490 ms.
540 ms., 590 ms., 640 ms.,
690 ms., 740 ms., 790 ms.
Refer to Hookflash End Time Selection on page
1-159.
0~9, *, # (up to 4 digits)
0 sec., 1 sec., 2 sec., 3 sec., 4 sec.,
5 sec., 6 sec., 8 sec.
0.5 sec., 1 sec., 1.5 sec., 2 sec.,
3 sec., 3.5 sec.
60/70 ms., 110/80 ms., 410/100 ms.,
610/100 ms., 810/190 ms.
Multiline Terminal Programming