Route Advance Block - NEC Xen IPK Features & Specifications Manual

Route Advance Block

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The Route Advance Block feature allows up to 32 tables to be assigned.
Each table may contain four Trunk group priority levels from lowest cost to
most expensive. A station user may have a Route Advance key
programmed on their telephone or may access this feature using a Trunk
Access Code. When placing an outside call, the system follows the Route
Advance table assigned for the station, ensuring that the lowest cost
available Trunk group is used. Any Trunk group can be assigned to multiple
route advance priority tables.
Terminal Type
All terminals.
Required Components
None.
To use this feature from a Multiline Terminal:
1. Press a line key assigned for a Route Advance Block.
2. Dial the desired number.
To use this feature from any station:
1. Lift the handset, and receive internal dial tone.
2. Dial a Route Advance Block Access Code.
3. Dial the desired number.
Data Assignment
The 32 Route Advance Blocks can be programmed in System
Programming.
Up to four Trunk groups can be programmed in one Route Advance
Block priority table.
Trunk groups can be repeated in multiple priority tables.
R-9
R9 – 497