HP 10500 Series Configuration Manual page 200

[Device-mdc-2-MDCA] mdc start
It will take some time to start MDC...
This MDC was started successfully.
[Device-mdc-2-MDCA] quit
# Log in to MDCA from the default MDC. Press Ctrl+D as prompted to access the CLI of MDCA.
[Device] switchto mdc MDCA
******************************************************************************
* Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
Automatic configuration is running, press CTRL_D to break or press CTRL_B to
switch back to the default MDC.
<Device> system-view
# Change the device name to MDCA for easy identification of the MDC.
[Device] sysname MDCA
# To enable the MDC administrator to remotely manage the MDC, assign an IP address to the
management Ethernet interface and enable the Telnet service.
[MDCA] interface M-GigabitEthernet 0/0/0
[MDCA-M-GigabitEthernet0/0/0] ip address 192.168.1.251 24
[MDCA-M-GigabitEthernet0/0/0] quit
[MDCA] telnet server enable
[MDCA] user-interface vty 0 63
[MDCA-line-vty0-63] authentication-mode none
[MDCA-line-vty0-63] user-role mdc-admin
# Return to the default MDC.
[MDCA-line-vty0-63] return
<MDCA> switchback
[Device]
2. Create and configure MDCB for Department B:
# Create MDCB.
[Device] mdc MDCB
Executing this command will create MDC MDCB ID 3 and empty folder /mdc/mdc3 in the
root directory of the storage media. Continue? [Y/N]:y
This MDC was created successfully
# Reclaim the interface card in slot 4 from the default MDC and assign it to MDCB.
[Device-mdc-3-MDCB] mdc Admin
[Device-mdc-1-Admin] undo location slot 4
The configuration associated with the specified slot of MDC will be lost. Continue?
[Y/N]:y
[Device-mdc-1-Admin] mdc MDCB
[Device-mdc-3-MDCB] location slot 4
# Assign interfaces Ten-GigabitEthernet 4/0/1 through Ten-GigabitEthernet 4/0/48 to MDCB.
[Device-mdc-3-MDCB] allocate interface ten-gigabitethernet 4/0/1 to
ten-gigabitethernet 4/0/48
The configurations of the interfaces will be lost. Continue? [Y/N]:y
# Start MDCB.
192
*
*
*