Hoisting Power Cables Onto A Tower - Huawei RRU3268 Installation Manual

RRU3268
Installation Guide
Step 2 Secure the fiber optic cables to the tower vertically using cable clips.
Step 3 Remove the lifting sling, traction sling, and protection pipe.
----End

7.3 Hoisting Power Cables onto a Tower

This section describes the procedure for hoisting power cables onto a tower and the
precautions that must be taken.
Context
Cabling requirements for power cables are met. For details, see
The procedure for adding a connector to the RRU power cable on the RRU side is done under
the tower.
Procedure
Step 1 Hoist the power cables onto the tower, as shown in
Figure 7-9 Hoisting power cables onto the tower
(1) Lifting sling
Issue 10 (2015-12-30)
NOTE
The procedure for hoisting the fiber optic cables onto the tower is for your reference only.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Hoisting an RRU and Related Cables onto a Tower
9.1 Cabling
Figure 7-9.
(2) Fixed pulley
Requirements.
45