Installing Two Rrus - Huawei RRU3268 Installation Manual

RRU3268
Installation Guide
Figure 8-7 Securing the captive screw into the connection hole
----End

8.2.2 Installing Two RRUs

This section describes the procedure and precautions for installing two RRUs on a pole.
Prerequisites
The hoist clamp on the main bracket is secured properly.
l Do not stand the RRU upright because the RF ports cannot support the weight of the RRU.
l Place a foam pad or cardboard under the RRU to protect the RRU housing from damage
Procedure
Step 1 Install the first RRU onto the main bracket, as shown in
Installing a Single
Issue 10 (2015-12-30)
NOTICE
during the installation.
RRU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing the RRU
Figure 8-8. For details, see 8.2.1
53