Figure 080-7: F19 Start Rinse Block Water Intake; Figure 080-8: F19 Test Routine - Miele G 4205 Technical Information
G 5 series
futura dishwashers
Hide thumbs
Also See for G 4205:
- Operating instructions manual (52 pages) ,
- Product dimensions (3 pages)
Table of Contents
Advertisement
Technical Information
Figure 080-7: F19 Start Rinse Block Water Intake
a
Measuring time for 0.26 gallons (one liter)
1
Normal water intake time sufficient (1 minute in this example)
2
Extended water intake time required (2 minutes in this example)
3
After 0.26 gallons (one liter) intake, it is clear that neither the normal nor
the extended water intake time will be sufficient. Therefore, the test routine
is started. (See below.)
Test routine:
Figure 080-8: F19 Test Routine
a
Measuring time for 0.26 gallons (one liter)
b
Test routine successful; water intake time is extended.
c
Test routine unsuccessful; fault code F19 is registered.
a. During the first step, water intake solenoid Y63 is activated in order to let
another 0.52 gallons (2 liters) flow into the machine. The required time is
calculated on the basis of the time that the 0.26 gallons of water already
in the machine required for intake.
Note: The volume of water cannot cause the machine to overflow, even if
the flow meter is inaccurate.
136
G 5xxx
Advertisement
Table of Contents
