Technical Information
Figure 010-1: Side Panel Removal
4.2
Drip Pan Removal
Warning!
Before tilting the machine onto its back, open the salt container cap briefly,
then close it firmly (this empties the water diverter). Then pump all water out
of the cabinet.
1. Uninstall the appliance.
2. Disconnect the appliance from the power supply.
3. Tip the dishwasher on its back. Ensure that the intake and drain hoses
are not crushed.
4. Remove the four retaining screws (T20; see Figure 010-2, Item 1).
34
G 5xxx