Electronic Removal (Incognito); Figure 100-3: On/Off Switch Removal (Touchtronic/Novotronic) - Miele G 4205 Technical Information

G 5xxx
Note:
If the dishwasher has a furniture front, insert a towel or similar between its
top edge and the fascia to prevent the risk of scratching.
5. Disconnect all plugs.
6. Press in the locking tabs; see Figure 100-3, Item 1.
7. Slide the on/off switch upwards (Figure 100-3, Item 2) and remove it from
its holder.

Figure 100-3: On/Off Switch Removal (Touchtronic/Novotronic)

Note:
When re-installing the bracket, make sure that the electronic's protective foil
is pulled down at the bottom so that it is below the plug area.
4.5

Electronic Removal (Incognito)

1. Uninstall the appliance.
2. Disconnect the appliance from the power supply.
3. Door outer panel removal (Section 030-4.3).
4. Fascia panel removal (Section 100-4.2).
5. Open the appliance door.
6. Remove the 6 T20 screws securing the electronic/mounting bracket
assembly to the fascia panel.
7. Disconnect the display board's ribbon cable from the fascia panel.
8. Remove the 3 T20 screws securing the electronic/mounting bracket
assembly to the appliance door.
9. Unsnap the electronic/mounting bracket assembly from the door.
10. Remove the 4 T20 screws securing the electronic to the mounting
155
Technical Information