Modular Systems And Hardware Characteristics - Siemens SIPROTEC 5 Series Hardware Description

1.2

Modular Systems and Hardware Characteristics

The SIPROTEC 5 series includes both modular and non-modular devices.
Modular devices consist of a base module (1/3 of 19 inches) and can be expanded with expansion modules
(1/6 of 19 inches). The device type identifier for modular devices is XXX85, XXX86, or XXX87, for example,
7SA86.
Type xxx84 devices have the same hardware properties as the modular devices, but they cannot be expanded
with expansion modules.
All non-modular devices consist of just a base module (1/3 of 19 inches) and cannot be expanded with expan-
sion modules (1/6 of 19 inches). The device type identifier for non-modular devices is 7XX82, for example,
7SJ82.
Modular System for Modular Devices
The system is based on a modular structure. A modular device always consists of a base module and optionally
of expansion modules. The modules can be selected according to hardware characteristics. These characteris-
tics are:
•
Module size
•
Type of construction
•
Fastening of the on-site operation panel
•
Creation of the on-site operation panel
•
Input and output module
•
Plug-in modules
The modules are available in 2 sizes:
•
Base module (1/3 of 19 inches)
•
Expansion module (1/6 of 19 inches)
The devices are available in 3 designs: These are:
•
Flush-mounting devices with on-site operation panel fitted directly on the device
•
Surface-mounted devices with integrated on-site operation panel
•
Surface-mounted devices with detached on-site operation panel
The on-site operation panels of the base modules can be selected from 3 variants:
•
With a large display, keypad, and 16 two-colored LEDs
•
With a small display, keypad, and 16 two-colored LEDs
•
Without a display, without a keypad (standard), but with 16 two-colored LEDs
The on-site operation panels of the expansion modules can be selected from 3 variants:
•
With 16 monochrome LEDs and 2 key switches
•
With 16 monochrome LEDs
•
With 8 LEDs and 8 function keys
•
Without display elements
The base modules always contain the power-supply module PS201 and an input and output module IO2XX.
The expansion modules contain an input and output module IO2XX or a plug-in module assembly with inte-
grated power supply CB202. The 1st expansion module in the 2nd device row always contains the power-
supply module PS203.
The plug-in modules are available for various applications. Plug-in modules can be installed in 1 base module
or in 1 expansion module with 1 plug-in module assembly with integrated power supply CB202. You can find
more information on the available plug-in module types in chapter
SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-C, Edition 10.2017
1.2 Modular Systems and Hardware Characteristics
4 Plug-In Modules.
Introduction
17