Xcommand Userinterface Osd Key Click; Xcommand Userinterface Osd Key Press; Xcommand Userinterface Osd Key Release; Xcommand Userinterface Presentation Externalsource Add - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

xCommand UserInterface OSD Key Click

Emulates a remote control key press, followed by a key release.
Requires user role: ADMIN
USAGE:
xCommand UserInterface OSD Key Click Key:
where
Key
: 0/1/2/3/4/5/6/7/8/9/C/Call/Disconnect/Down/F1/F2/F3/F4/F5/Grab/Home/Layout/Left/
Mute/MuteMic/Ok/PhoneBook/Presentation/Right/Selfview/Square/SrcAux/SrcCamera/
SrcDocCam/SrcPc/SrcVcr/Star/Up/VolumeDown/VolumeUp/ZoomIn/ZoomOut/+/-
Define the remote key to press.

xCommand UserInterface OSD Key Press

Emulates a remote control key press without releasing it. The Key Press command must be
followed
by a Key Release command to emulate releasing the key.
Requires user role: ADMIN
USAGE:
xCommand UserInterface OSD Key Press Key:
where
Key
: 0/1/2/3/4/5/6/7/8/9/C/Call/Disconnect/Down/F1/F2/F3/F4/F5/Grab/Home/Layout/Left/
Mute/MuteMic/Ok/PhoneBook/Presentation/Right/Selfview/Square/SrcAux/SrcCamera/
SrcDocCam/SrcPc/SrcVcr/Star/Up/VolumeDown/VolumeUp/ZoomIn/ZoomOut/+/-
Define the remote key to press.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration
Key
Key
xCommand xCommand

xCommand UserInterface OSD Key Release

Emulates a remote control key release. The Key Release command is issued after a Key Press
command.
Requires user role: ADMIN
USAGE:
xCommand UserInterface OSD Key Release Key:
where
Key
: 0/1/2/3/4/5/6/7/8/9/C/Call/Disconnect/Down/F1/F2/F3/F4/F5/Grab/Home/Layout/Left/
Mute/MuteMic/Ok/PhoneBook/Presentation/Right/Selfview/Square/SrcAux/SrcCamera/
SrcDocCam/SrcPc/SrcVcr/Star/Up/VolumeDown/VolumeUp/ZoomIn/ZoomOut/+/-
Define the remote control key to release.

xCommand UserInterface Presentation ExternalSource Add

Establish and set up an input source that is connected to the video system via an external
switch.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE:
xCommand UserInterface Presentation ExternalSource Add ConnectorId:
SourceIdentifier: "SourceIdentifier" Name: "Name" Type:
where
ConnectorId
: Integer (2..2)
The ID of the video system connector that the external switch is connected to.
SourceIdentifier
: String (0, 40)
A unique string that identifies the input source. The identifier is used by other
commands and events when addressing this specific input source.
Name
: String (0, 40)
The name of the input source. This name will be displayed on the user interface.
Type
: camera/desktop/document_camera/mediaplayer/PC/whiteboard/other
The type of input source. The type determines which icon to display on the user
interface.
132
API Reference Guide
xStatus Appendices
Key
ConnectorId
Type
Copyright © 2017 Cisco Systems, Inc. All rights reserved.