Cisco TelePresence DX70 and DX80
Introduction
xStatus Cameras Camera [n] SoftwareID
Shows the software identity of the camera.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
Example:
xStatus Cameras Camera 1 SoftwareID
*s Camera 1 SoftwareID: "S01718-4.0FINAL [ID:40063] 2014-10-20"
** end
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API
xConfiguration
xCommand
Capabilities status
xStatus Capabilities Conference MaxActiveCalls
Shows the the maximum number of simultaneous active calls. Calls that are set on hold/transfer
are not counted as active.
Requires user role: ADMIN, USER
Value space of the result returned:
0..5
Example:
xStatus Capabilities Conference MaxNumberOfActiveCalls
*s Capabilities Conference MaxNumberOfActiveCalls: 3
** end
xStatus Capabilities Conference MaxAudioCalls
Shows the the maximum number of simultaneous audio calls that is supported.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Capabilities Conference MaxAudioCalls
*s Capabilities Conference MaxAudioCalls: 3
** end
xStatus Capabilities Conference MaxCalls
Shows the the maximum number of simultaneous calls.
Requires user role: ADMIN, USER
Value space of the result returned:
0..5
Example:
xStatus Capabilities Conference MaxCalls
*s Capabilities Conference MaxCalls: 3
** end
154
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.