Cisco TelePresence DX70 and DX80
Introduction
xStatus Audio Output Connectors Line [n] ConnectionStatus
Shows whether the audio output line is connected.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Connected / NotConnected / Unknown
Example:
xStatus Audio Output Connectors Line 1 ConnectionStatus
*s Audio Output Connectors Line 1 ConnectionStatus: Connected
** end
xStatus Audio SelectedDevice
Shows the audio device that is selected. Only the DX70 supports analog headsets.
Requires user role: ADMIN, USER
Example:
xStatus Audio SelectedDevice
*s Audio SelectedDevice: Internal
** end
xStatus Audio Volume
Shows the volume level (dB) of the loudspeaker output.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
0..100
Example:
xStatus Audio Volume
*s Audio Volume: 70
** end
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API
xConfiguration
xCommand
xStatus Audio VolumeHandsetUsb
Shows the volume level of the USB handset.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Audio VolumeHandsetUsb
*s 6
** end
xStatus Audio VolumeHeadsetAnalog
Shows the volume level of the analog headset (DX70 only).
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Audio VolumeHeadsetAnalog
*s 6
** end
xStatus Audio VolumeHeadsetUsb
Shows the volume level of the USB headset.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Audio VolumeHeadsetUsb
*s 6
** end
148
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.