Precautions For Use - Panasonic EA-7HW02AP1 User Manual

Precautions for use


The installation work must be carried out by a professional installer.
Incorrect installation may cause tip-over resulting in accidents.

Turn the power off when cleaning this product. Use a soft cloth to clean this product.
When dust is hard to remove, use a soft cloth soaked in diluted detergent and squeezed hard to wipe it, and
then wipe with a dry soft cloth.

Do not use any of alcohol, petroleum, thinner, benzene, boiling water, polishing powder and soap
powder for cleaning and maintenance.
When using a chemical cloth for cleaning, read the caution provided with the chemical cloth product.

Do not place this product in a place where temperature is high such as a place near a heating
equipment or a boiler.
Failure to observe this may result in deformation/deterioration of the surface/parts of the product or cause a
failure.

Do not bring fire close to the product.
Failure to observe this may result in deformation/deterioration of the surface/parts of the product or cause a
failure.

Do not place this product in a place where hydrogen sulfide, phosphorus, ammonia, sulfur, carbon,
acid, dust or noxious gas can exist.
Failure to do so may result in failure or shorten the life of the product.

Do not place this product near a source of electromagnetic wave or a magnetized object.
(High-frequency sewing machine, electric welder, magnet, etc.)
Failure to observe this may result in generation of noise or cause a failure.

Do not apply a strong impact or vibration to this product.
If a strong impact caused by a fall or a strike is applied, it may result in a failure or a damage.

When disposing of this product, handle it as an industrial waste and follow laws and regulations
appropriately.
10