Panasonic EA-7HW02AP1 User Manual page 49

Important
Use a screw whose nominal diameter is 5 mm to fix on the installation surface.
This screw shall be prepared by the installer according to the material of the installation surface.
(3) Fix this product onto the mounter fixed on the wall.
Hook the M6 screws (x4) on the rear into the hook holes on the mounter.
M6 screw (x4) Hook hole (x4)
(4) Align the hook hole on the front of the mounter and the M6 screw on the rear of this product.
(5) Hold the both sides of this product and slide it downward.
(6) Thread the M3 screw into the fixing hole firmly. (Recommended tightening torque: 0.6 N･m ± 0.1 N･m)
49