Panasonic EA-7HW02AP1 User Manual page 25

Descriptions about each LED, switch and connector are in the following table.
No. Signal
(1) ACT LED
(2) 5G LED
(3) 2.4G LED
(4) ETH LED
(5) INIT switch
(Push switch)
(6) Ethernet IF
ETH
(RJ-45 modular jack)
(7) DC IN jack
Indicates the operational/error status of the unit.
Lights red Error detection during operation
Lights green In operation
Displays the status of wireless IF 5 GHz
Lights green In normal operation
Off In the process of start-up
Displays the status of wireless IF 2.4 GHz
Lights green In normal operation
Off In the process of start-up
Indicates the link status of the Ethernet port.
Blinks green In the process of frame transmission/reception
Lights green Link established
Off Link disconnected
Initializes configuration data and log data.
Connect an Ethernet cable.
The ETH port supports power supply from a PoE power feeding equipment.
Connect the DC plug of the provided AC adapter.
25
Function