NEC Express 5800 Series User Manual page 62

BMC Configuration User's Guide
Item Description
Management LAN Management LAN setting
Management LAN port to communicate with BMC is displayed. *1
LAN
Connection Type Set and display the connection type of managed server.
BMC MAC MAC Address is displayed.
Address
DHCP Determine whether to dynamically obtain an IP address from a
DHCP server. If the item is set Enable and applied, BMC set the
value obtained from DHCP server on "IP Address", "Subnet
Mask" and "Default Gateway".
IP Address Set the BMC IP address of the managed server.*3
Subnet Mask Set the Subnet Mask of the managed server. *2 *3
Default Gateway Set the Default Gateway IP address of the managed server. *3
If you set this item, it is necessary for applying configuration
information that the gateway is connected on network.
Dynamic DNS Determine whether to enable/disable of Dynamic DNS. *4
DNS Server Set the DNS Server.
Auto Negotiation
: Connecting by suitable setting.
100Mbps Full
: Connecting by Full Duplex at speed of 100 Mbps.
100Mbps Half
: Connecting by Half Duplex at speed of 100 Mbps.
10Mbps Full
: Connecting by Full Duplex at speed of 10 Mbps.
10Mbps Half
: Connecting by Half Duplex at speed of 10 Mbps.
Default Value
Management LAN
Auto Negotiation
Blade Server:
Enable
Other server:
Disable
192.168.1.1
255.255.255.0
0.0.0.0
Disable
0.0.0.0