Table of Contents
Advertisement
4 SETUP AND PREPARATION BEFORE OPERATION
CAUTION
4
4 - 2
Dispose of the product as industrial waste.
Use the module in the environment indicated in the general specifications given in
this manual.
Not doing so can cause an electric shock, fire, malfunction, product damage or
deterioration.
Securely fix the module to a DIN rail or securely fix it with the CC-Link connector
type fitting.
Not doing so can cause a drop or malfunction.
Mount or dismount the module to or from an enclosure after switching power off
externally in all phases. Not doing so can cause the module to fail or malfunction.
Always make sure to touch the grounded metal to discharge the electricity charged
in the body, etc., before touching the module.
Failure to do so may cause a failure or malfunctions of the module.
(1) When using the DIN rail adapter, install the DIN rail by making sure of the
following:
(a) Applicable DIN rail models (conforming to the JIS C 2812)
TH35-7.5Fe
TH35-7.5Al
(b) DIN rail installation screw interval
When installing the DIN rail, tighten the screws with less than 200mm (7.87
inch) pitches.
(2) As the CC-Link connector type metal installation fitting, use the narrow-width type
(width 41)-dedicated fitting.
(a) CC-Link connector type metal installation fitting model
A6PLT-J65V1
(3) Refer to the Master Module user's manual for specification, and manufacturers of
supported cables for the use with AJ65VBTCU-68ADVN/ADIN.
MELSEC-A
4 - 2
Advertisement
Table of Contents
