6.
Set the network configuration as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Basic Settings] [Network
Configuration Settings]
7.
Set the refresh settings as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Basic Settings] [Refresh Settings]
8.
Write the set parameters to the CPU module on the master station. Then reset the CPU module or power off and on the
system.
[Online] [Write to PLC]
In this setting example, default settings are used for the parameters other than those described. For the
parameters, refer to the following.
MELSEC iQ-R CC-Link IE Field Network User's Manual (Application)
1 FUNCTIONS
64
1.8 Redundant Function