Mitsubishi Electric MELSEC iQ-R Series User Manual page 85

Item Description
Setting Right-click in the "Transfer Setting between Devices" window and
Method select a device setting method from the "Setting Method" menu.
• Start/End: Enter the start and end numbers of devices.
• Points/Start: Enter the points and start numbers of devices.
Device Set a transfer source device and transfer destination device.
Name Set W device for either the transfer source device or transfer
destination device.
Points Set the number of points of the device to be transferred.
Start Set the start number of the device to be transferred.
End Set the end number of the device to be transferred.
*1 For bit devices, specify a device number in 16-point units to make possible to use in units of words.
Setting Range
• Start/End
• Points/Start
(Default: Start/End)
• SB
• SW
• SM
• SD
• W
(Default: Blank)
*1
• SB: 16 to 8192
• SW: 1 to 8192
*1
• SM: 16 to 2048
• SD: 1 to 2048
• W: 1 to 8192
(Default: Blank)
Source
*1
• SB: 00000H to 01FF0H
• SW: 00000H to 01FFFH
*1
• SM: 0 to 2032
• SD: 0 to 2047
• W: 00000H to 01FFFH
(Default: Blank)
Destination
*1
• SB: 00000H to 01FF0H
• SW: 00000H to 01FFFH
*1
• SM: 0 to 2032
• SD: 0 to 2047
• W: 01000H to 01FFFH
(Default: Blank)
Source
*1
• SB: 0000FH to 01FFFH
• SW: 00000H to 01FFFH
*1
• SM: 15 to 2047
• SD: 0 to 2047
• W: 00000H to 01FFFH
(Default: Blank)
Destination
The number is automatically set according to the setting of the transfer source.
2 PARAMETER SETTINGS
2.1 CPU Parameters
2
83