Canon Wireless LAN Board-B2 User Manual page 42

2
2-12
Security Settings
❑
Press [Encryption for WPA/WPA2] ➞ select the WPA encryption method type to
use.
If you select [Auto], the WPA encryption method is set to AES-CCMP or TKIP,
according to the settings of the access point. If you want to use TKIP as the
WPA encryption method type, select [Auto].
● If you want to select WPA/WPA2-PSK:
❑
Press [Security] ➞ select [WPA/WPA2 + PSK].
❑
Press [Encryption for WPA/WPA2] ➞ select the WPA encryption method type.
If you select [Auto], the WPA encryption method is set to AES-CCMP or TKIP,
according to the settings of the access point. If you want to use TKIP as the
WPA encryption method type, select [Auto].
● If you want to select 802.1X/EAP+WEP:
❑
Press [Security] ➞ select [802.1X/EAP+WEP].
● If you want to select WEP:
❑
Press [Security] ➞ select [WEP].
● If you do not want to set encryption and authentication method:
❑
Press [Security] ➞ select [Off].