Table Of Contents - ABB ACS150 User Manual

New parameters and parameter values (EN page 72)
Parameters
Index Name/Selection
11 REFERENCE
SELECT
1106 REF2 SELECT
PID1OUT
14 RELAY OUTPUTS
1401 RELAY OUTPUT 1
PID SLEEP
32 SUPERVISION
3201 SUPERV 1 PARAM
126, 128, 130, 132
3204 SUPERV 2 PARAM
126, 128, 130, 132
3207 SUPERV 3 PARAM
126, 128, 130, 132
34 PANEL DISPLAY
3401 SIGNAL1 PARAM
126, 128, 130, 132
3408 SIGNAL2 PARAM
126, 128, 130, 132
3415 SIGNAL3 PARAM
126, 128, 130, 132
Description
Panel reference type, external control location selection and external
reference sources and limits
Selects the signal source for external reference REF2.
New value. PID controller 1 output. See parameter group
SET 1.
Status information indicated through relay output, and relay operating delays
Selects a drive status indicated through relay output RO. The relay energises
when the status meets the setting.
New value. PID sleep function. See parameter group
1.
Signal supervision. The drive monitors whether certain user selectable
variables are within the user-defined limits. The user may set limits for speed,
current etc. Supervision status can be monitored with relay output. See
parameter group 14 RELAY
Selects the first supervised signal. Supervision limits are defined by
parameters 3202 SUPERV 1 LIM LO and 3203 SUPERV 1 LIM HI.
New values. Parameter index in group
0102 SPEED. 0 = not selected.
Selects the second supervised signal. Supervision limits are defined by
parameters 3205 SUPERV 2 LIM LO and 3206 SUPERV 2 LIM HI. See
parameter 3201 SUPERV 1 PARAM.
New values. Parameter index in group
0102 SPEED
Selects the third supervised signal. Supervision limits are defined by
parameters 3208 SUPERV 3 LIM LO and 3209 SUPERV 3 LIM HI. See
parameter 3201 SUPERV 1 PARAM.
New values. Parameter index in group
0102 SPEED
Selection of actual signals to be displayed on the panel
Selects the first signal to be displayed on the control panel in display mode.
3401
LOC
OUTPUT
New values. Parameter index in group
0102 SPEED. If value is set to 0, no signal is selected.
Selects the second signal to be displayed on the control panel in display
mode. See par. 3401 SIGNAL1 PARAM.
New values. Parameter index in group
0102 SPEED. If value is set to 0, no signal is selected.
Selects the third signal to be displayed on the control panel in display mode.
See par 3401 SIGNAL1 PARAM.
New values. Parameter index in group
0102 SPEED. If value is set to 0, no signal is selected.
40 PROCESS PID SET
OUTPUTS.
01 OPERATING
01 OPERATING
01 OPERATING
3404
3405
491
.
Hz
FWD
01 OPERATING
01 OPERATING
01 OPERATING
Def
2 = POT
40 PROCESS PID 19
3 =
FAULT(-1)
30
103
DATA. E.g. 102 =
104
DATA. E.g. 102 =
105
DATA. E.g. 102 =
103
DATA. E.g. 102 =
104
DATA. E.g. 102 =
105
DATA. E.g. 102 =
Update notice
5