Table of Contents
Advertisement
Logging in to the Machine
If Department ID Management is enabled or System Manager IDs are enabled, you must log in before using the
machine. You also need to log in if use of the fax and scan functions is restricted.
●
The System Manager ID and PIN are set to "7654321" at the factory. It is recommended that you change this
setting for higher security.
Department ID Management Login(P. 126)
Logging in to Authorized Send(P. 127)
Department ID Management Login
When the login screen appears, use the procedure below to enter the Department ID and PIN.
When <Insert the card.> is displayed, see
1
Enter an ID.
1
Select <Department ID> or <System Manager ID>.
2
Enter the ID.
●
If no PIN is registered, proceed to step 3.
2
Enter the PIN.
1
Select <PIN>.
2
Enter the PIN.
3
Select <Log In>.
➠
The login screen will be changed to the Home screen.
●
After you finish using the machine, select <Log Out> to display the login screen.
Basic Operations
Copy Card Reader(P. 755) .
126
19YU-02L
Advertisement
Table of Contents
