Connecting Directly (Access Point Mode)
Even in an environment without a wireless LAN router, using "Access Point Mode," which can directly connect a mobile
device to the machine wirelessly, enables you to connect the mobile device on hand to the machine without difficult
settings.
Preparing for Direct Connection (Access Point Mode)(P. 336)
Connecting Directly(P. 337)
●
Optional products are required to use NFC.
Preparing for Direct Connection (Access Point Mode)
Establish a connection by using Access Point Mode in the following order.
Specifying the value for time until auto termination
●
You can specify the time to automatically establish a disconnection when the direct connection is enabled.
<Direct Connection Termination> (P. 463)
Linking with Mobile Devices
System Options(P. 754)
Check the network settings of the machine.
●
Set the IPv4 address.
Preparing the Mobile Device
●
Configure settings to connect the mobile device to Wi-Fi.
Put the machine into the connection standby status.
●
<Menu>
<Preferences>
<Use Direct Connection> to <On>.
336
Setting IPv4 Address(P. 30)
<Network>
<Direct Connection Settings>
19YU-06A
set