ABB Tropos 1410 Installation Manual page 3

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (EIRP) is not more than that permitted for successful communication.
CSA Notice
The Tropos 1410-HAZ is certified for use in Class I, Division 2, Groups A, B, C, D Hazardous Locations. Such
locations are defined in Article 500 of the National Fire Protection Association (NFPA) publication NFPA 70,
otherwise known as the National Electrical Code.
The Tropos 1410 has been recognized for use in these hazardous locations by the Canadian Standards Association
(CSA). product is recognized for use in these hazardous locations, in accordance with UL Standard 1604 and CSA
STD C22.2 No. 213-M1987.
All other wiring and power to the product when installed in hazardous locations must be in accordance with all
appropriate standards.
Do not connect or disconnect cables to the product in the hazardous location.
Do not connect or disconnect the antennas from the product in a hazardous location.
Only the Tropos 1410-HAZ is certified for installation in hazardous environments. Ensure that only units labeled as
follows are installed in such areas:
European Union WEEE Notice
For EU member countries, this symbol means: Do not dispose of this equipment as unsorted
municipal waste. This equipment must be collected separately.
The return and collection of this product has not been defined at this time, please contact Tropos
Networks for return and/or collection.
It is important for users of this equipment to participate in reuse, recycling, and other forms of
recovery. The potential effects on the environment and human health as a result of the presence of
hazardous substances in electrical and electronic equipment are a waste of natural resources and
cause pollution.
Tropos 1410 Installation Guide 3