Led Indicator; Figure 12 Connecting The Serial Cable To The Tropos 1410; Table 5 Led Indicator States - ABB Tropos 1410 Installation Manual

Table 4
Pin
6
7
8
Figure 12

LED Indicator

The Tropos 1410 is equipped with an LED indicator. The LED indicator has three states, as
shown in
Table 5
State
Off
Flashing
On
Tropos 1410 Installation Guide
Serial Pin Assignments (continued)
Option 1 (one serial port)
not used
Power -
Power -
Connecting the Serial Cable to the Tropos 1410
Serial port
Table 5.
LED Indicator States
Description
The unit has no power or is not operating.
The unit has power but is not ready. It may be in the process of associating with
the network or it may not be able to associate with a network.
The unit is associated with the network and operating properly.
Option 2 (two serial ports)
RS-232 (port 2) TX
not used
not used
Ethernet port
Chapter 2
32