Figure 19 Remote Mount The Ps079001 On A Metal Pole - ABB Tropos 1410 Installation Manual

Remote mount the PS079001 on a metal pole
Use the hose clamp to secure the pole bracket to the pole, as shown in
1.
Secure the PS079001 mounting bracket to the pole bracket. Secure with two each 10-32
2.
screws
Connect the PoE + LAN output cable from the PS079001 LAN output port to the Ethernet
3.
port on the Tropos 1410.
Connect the AC power cable to the AC power source.
4.
Note
When the PS079001 is remotely mounted, the data and power out cable supplied with the unit must be
replaced with an outdoor-rated Ethernet cable of sufficient length.
Figure 19
Data and
power out
(to Tropos 1410
or BB 063001)
Tropos 1410 Installation Guide
(Figure 19).
Remote Mount the PS079001 on a Metal Pole
Mounting
plate
PS079001
AC power
input
Data in
Figure 5
Pole bracket
(requires pole mount kit)
Chapter 3
on page 21.
43